GE Door 19204 User Manual

GE Model 19204/19218  
Wired Push Button  
This button is not recommended for use on systems which exceed 16 volts.  
Included hardware:  
(2) 3x20mm screws  
Installation  
Push buttons are typically mounted at the same height above the door sill as the  
door knob or handle (between 36” and 44” above the sill).  
Taking out the back cover of the push button:  
1. Locate the two door chime wires emanating from the existing door chime  
circuit.  
2. Test the door chime by touching the two wires together, completing the circuit.  
If the door chime does not sound, check the chime transformer or chime.  
3. Turn off power.  
4. Attach one wire to each of the screw terminals on the back of the button.  
5. Mount the button in the desired location with two (2) screws provided. Install  
according to applicable local electrical codes.  
6. Close the back cover.  
 

Clarion CD Player DRX9675z User Manual
Compaq Personal Computer 400 486 DX2 40 MHZ 250 MB 4 MB 95 User Manual
Crown Audio Stereo Amplifier CT 810 User Manual
Crown Audio Stereo Amplifier I T12000 HD User Manual
Cuisinart Toaster CPT 90C User Manual
Dell Server BMX01 User Manual
Desa Tech Indoor Fireplace CGFB32CC User Manual
Dixon Lawn Mower ZTR 5017 User Manual
Euro Pro Food Processor FP105B User Manual
Flying Mole Stereo Amplifier CAS10 User Manual