Extron electronic Network Card RGB 500 Series User Manual

Specifications — RGB 500 Series Interfaces  
Video  
Gain ............................................... Unity (0.70V p-p), (0.725V p-p) 50% peaking, (0.75V p-p) 100% peaking  
Bandwidth .................................... 300 MHz (-3dB)  
Video input  
Number/signal type ................... 1 analog RGBHV, RGBS, RGsB, RsGsBs  
Connectors  
RGB 500, RGB 500 Dual, RGB 508  
1 9-pin D male, MBC/LBC cable or buffer  
RGB 560, RGB 560 Dual, RGB 568, RGB 560 AKM  
1 15-pin HD female  
Minimum/maximum levels ...... Analog ....... 0.3V to 1.5V p-p with no offset  
Impedance .................................... 75 ohms or High Z, switchable (set to 75 ohms if no local monitor is connected)  
Horizontal frequency .................. Autoscan 15 kHz to 130 kHz  
Vertical frequency ....................... Autoscan 30 Hz to 120 Hz  
Return loss .................................... -30dB @ 5 MHz  
Maximum DC offset .................... 4.0V  
Video output  
Number/signal type ................... 1 analog RGBHV, RGBS, RGsB  
Connectors  
All models......................... 5 BNC female  
RGB 560, RGB 560 Dual, RGB 568, RGB 560 AKM  
1 15-pin HD female for buffered local monitor output  
Minimum/maximum levels ...... 0.70V to 0.75V p-p with no offset and 0.7V p-p input  
Impedance .................................... 75 ohms  
Return loss .................................... -30dB @ 5 MHz  
Sync  
Input type ..................................... RGBHV TTL ( ), RGBS TTL (-), RGsB 0.3V (-), RsGsBs 1.3V (-)  
Output type .................................. RGBHV ( ), RGBS(-), RGsB (-)  
Input level ..................................... 2V to 5.5V p-p with 0.3VDC offset (max.)  
Output level.................................. 4V to 5V p-p  
Input impedance.......................... 10 kohms  
Output impedance ...................... 75 ohms  
Max. input voltage ...................... 5.7V p-p  
Max. propagation delay.............. 48 nS  
Max. rise/fall time ....................... 3.5 nS  
Polarity  
RGB 560 AKM .................... RGBHV ...................... Polarity follows input when RGBHV is input and the sync  
polarity switch is set to Off. Sync polarity is negative if the  
sync polarity switch is set to On.  
RGBS, RGsB .............. Negative  
All other models ................ RGBHV ...................... Polarity follows input when RGBHV is input and the bottom  
panel sync polarity jumper is set to follow (pin 1 jumpered to  
pin 2). Sync polarity is negative if the sync polarity jumper is  
set to negative (pin 2 jumpered to pin 3).  
RGBS, RGsB .............. Negative  
Audio  
Gain ............................................... Unbalanced 0dB, balanced +6dB  
Frequency response..................... 20 Hz to 20 kHz, 0.05dB  
THD + Noise ................................ 0.03% @1 kHz, 0.3% @ 20 kHz at rated maximum output drive  
S/N ................................................ >90dB at rated maximum output (14dBm), balanced  
Stereo channel separation .......... >95dB @ 1 kHz to 20 kHz  
1-2  
RGB 500 Series • Specifications  
 

Electro Voice Microphone PL84 User Manual
Electro Voice Portable Speaker FM 1502 User Manual
Eureka Vacuum Cleaner 3281 User Manual
EverFocus DVR EKR KB1 User Manual
Extron electronic Portable Stereo System AAP User Manual
Garland Range C0836 8 User Manual
Gemini MP3 Player CDMP 1300 User Manual
Gianni Industries Door GE 320 series User Manual
Gigabyte Portable Speaker GP S5500 User Manual
Global Machinery Company Drill MX372 User Manual